Bellow I will list all the commands Sigma will obey.
When applicable, I will show the respective keybind used for the function like this: [KEY]
Some commands have alternative versions, which will be denoted by a "/"
All commands must start with "Tell me about" or "what is/are" then the name of a commodity or component/material.
Example of commodity: Tell me about ancient relic
Example of component: What are chemical processors
Want to find out which crew member is reponsible for each areas of the ship?
Who is on duty?
Who is on duty today?
Want to put crew members on duty in a specific area of the ship?
You have to call that member by his/her name and wait for the response
Then you assign (s)he to the area.
Supported crew members (depends on the ammount of Text To Speech voices (English) you have installed on your Windows, be it Microsoft's or IVONA 2's voices): Amy (IVONA 2), Catherine (MS), David (MS), Emma (IVONA 2), Eric (IVONA 2), George (MS), Geraint (IVONA 2), Gwyneth (IVONA 2), Hazel (MS), James (MS), Jennifer (IVONA 2), Joey (IVONA 2), Kendra (IVONA 2), Kimberly (IVONA 2), Linda (MS), Mark (MS), Nicole (IVONA 2), Raveena (IVONA 2), Richard (MS), Russell (IVONA 2), Salli (IVONA 2), Sean (MS) and Zira (MS)
Commands to assing to each area:
You are second in command (becomes the default voice and will manage functions not set to other crew members)
Take care of engineering (responds to all commands related to engineering, pips, thrusters, etc)
Take care of helm (responds to all commands related to the center panel, weapons, SRV, etc)
Take care of navigation (responds to all commands related to navigation panel, system and galaxy map)
Science officer (responds to commands related to commodities, materials and galaxypedia)
Example 1:
Zira
Take care of engineering
Example 2:
Raveena
Science officer
Example 3:
Linda
Take care of navigation
You can even set crew members to take care of two areas, like this:
Example 4:
Joey
Helm and science
Want to leave just one crew member responsible for everything? Issue the two commands bellow:
(choose a crew member name)
You and me now / Only you and me now
Want to revert to the TTS voice configured in Windows as default? Use the command bellow:
Clear voices
If you want EDDI to be verbose (default behavior), that is, it gives you information almost all the time, use the following command:
verbosity on
If you want EDDI to be silent, only talking to you when you ask for information, use the following command:
verbosity off
Sigma has a galaxypedia, containing information about astronomy subjects and all the Power Play characters in the game.
To start/load the Galaxypedia you have to tell Sigma to load it.
Example: Load Galaxypedia
You can ask for specific subjects starting the command with "Tell me about" then the subject.
Example: Tell me about dark energy
But since there are 242 subjects in the galaxypedia and you might not know the name of all of them, you might want to have Sigma tell you about a random subject. For that purpose you can use one of the following three commands:
Tell me a random fact
Tell me a random information
Galaxypedia
If you are done with the Galaxypedia, just tell Sigma to close it.
Example: Close Galaxypedia
However, you can keep the Galaxypedia open/loaded while you use Sigma to manage the ship. It's up to you ;)
These are commands to try and interact with Sigma. You know... for those boring moments during very long trips around the galaxy:
Are you OK?
Are you a robot?
Are you human?
Are you ready?
Good morning
Good afternoon
Good night
Hello Sigma
How are you?
Information
Let's hunt
Tell me your origin
Tell me about the Galaxypedia
What is your version?
Who are you?
Why are you here?
* some responsoes require EDDI to work properly
You can tell Sigma to open the Galaxy Map and System Map for you
Galaxy map [']
System map [#]
Close/Exit map [BACKSPACE] - closes the current open map
It can start playing music on your media player, pause/stop it, skip to the next or previous song:
Play music
Pause music
Stop music
Next song
Previous song
Left panel [1]
Show navigation
Show transactions
Show contacts
Show target
Communication panel [2]
Show communication
Show alerts
Show friends
Show history
Show squadron
Comm settings
Center panel [3]
Show commander (Odyssey)
Show fighters
Show SRV
Show crew
Show loadout (Odyssey)
Start disembark (Odyssey)
Right panel [4]
Show home
Show modules
Show firegroups
Show ship
Show inventory
Show storage (Odyssey)
Show status
Show playlist
General panel commands:
Close panel/Finish [BACKSPACE] - to close the current panel
Run diagnostics - Sigma asks you a few questions to know in which tab each panel is positioned. (this is usefull after a "Reboot AI" or when you changed the tabs manualy). Listen carefully to what Sigma will say and only answer after it has stopped talking
Power shields [LEFT 3x] - places 4 pips on system/shields
Power engines [UP 3x] - places 4 pips on engines
Power weapons [RIGHT 3x] - places 4 pips on weapons
Power engines and shields - transfers 2 pips and a half to engines and shields
Power engines and weapons - transfers 2 pips and a half to engines and weapons
Power shields and weapons - transfers 2 pips and a half to shields and weapons
Persuit mode - transfers 3 pips to weapons and engines (leaving system/shields without any)
Retreat mode - transfers 3 pips to shields and engines (leaving weapons without any)
Tank mode - transfers 3 pips to shields and weapons (leaving engines without any)
Balance power [DOWN] - reset the pip distribution to system, engines and weapons
Enable silent running [DEL] - turns Silent Running on*
Disable silent running [DEL] - turns Silent Running off*
*I added the "Sigma" prefix to avoid enabling this commands by accident. We know how dangerous these can be in the middle of a fight ;)
Highest threat [H] - targets the ship attacking you
Switch target/Next target [G] - selects the next near target
Target sub-system [Y] - targets the sub-system/sub-target of an already selected ship.
Target nav beacon - only works when you are in the region of a Nav Beacon and you want to scan it
Target wingman one [7] - targets/selects the first member of your wing
Target wingman two [8] - targets/selects the second member of your wing
Target wingman three [9] - targets/selects the third member of your wing
Acquire target [0] - acquire the target from the previously selected wingman
Deploy cargo scoop [HOME]
Deploy landing gear [L]
Disable standby - to make Sigma come out of "stand by" and resume listening to your commands
Eject cargo [END] - Be carefull! It will jettison all cargo.
Fire chaff [C]
Launch heat sink [V]
Lights on [INS]
Lights off [INS]
Night vision on [;]
Night vision off [;]
Discovery mode on [M]
Discovery mode off [M]
Next jump/system [I] - selects the next system in your route. To be used in case you selected another destination when in a system.
Orbit lines [=] - turns the orbit lines on or off
Reboot AI - resets all variables (this is usefull in the case Sigma gets crazy, but MAINLY after Elite Dangerous crashes or we have connection problems, which usually forces us to restart the game)
Retract cargo scoop [HOME]
Retract landing gear [L]
Scan system [K] - when you have an Advanced Scanner in your ship and you want to scan the whole system
Shield cell [+] - activates shield cell bank
Stand by - in case you want Sigma to stop listening to your commands
Stations count - if the ship has enough information about the current system, Sigma will tell you the ammount of station (orbital, planetary, etc) present in the system *requires EDDI to work properly
Where are we/Where am I? - in case you forgot in which system you are ;) *requires EDDI to work properly
Docking and Taking Off
Departure hand over/Take off - must be docked at a station
Request docking - must be less than 7.5km from the station
Fighter commands (in keybinds order)
Recall ship / Return home / Fighter come back [Num 0]
Defend me / Defend ship [Num 1]
Engage at will / Fighter fire at will [ Num 2]
Attack target / Fighter attack target [Num 3]
Maintain formation [Num 4]
Hold position [Num 5]
Follow me / Fighter follow me [Num 6]
SRV commands
Deploy SRV One (Odyssey) - when you have at least one SRV in your ship and you want to deploy it after landing on a planet's surface
Deploy SRV Two (Odyssey) - when you have at least two SRVs in your ship...
Deploy SRV Three (Odyssey) - when you have at least four SRVs in your ship...
Deploy SRV Four (Odyssey) - when you have at least four SRVs in your ship...
Dismiss Ship (Odyssey) - To dismiss your ship after you deployed your SRV.
Board ship - when you want to go back to your ship and have stopped the SRV at the proper spot under the ship.
Recall Ship (Odyssey) - To recall your ship to the surface of a planet/moon.
* Sigma will warn you in case you tell it to enable something (lights, cargo scoop, landing gear) but they are already enabled; or you tell it to disable, but they aren't enabled
Here are the commands to tell Sigma to mange the ship' speed for you.
Set the ship to 0% of speed
Boost [TAB]
Full stop / Engines to zero / Zero [RCtrl + NUM 5]
Set the ship to 25% of speed (forward)
25 / 25 percent / Quarter impulse [RCtrl + NUM 6]
Set the ship to -25% of speed (reverse)
minus 25 / minus 25 percent [RCtrl + NUM 4]
Set the ship to 50% of speed (forward)
50 / 50 percent / Half impuse [RCtrl + NUM 7]
Set the ship to -50% of speed (reverse)
minus 50 / minus 50 percent [RCtrl + NUM 3]
Set the ship to 75% of speed (forward)
75 / 75 percent [RCtrl + NUM 8]
Set the ship to -75% of speed (reverse)
minus 75 / minus 75 percent [RCtrl + NUM 2]
Set the ship to 100% of speed (forward)
100 / 100 percent / Full throttle / Maximum impulse [RCtrl + NUM 9]
Set the ship to -100% of speed (reverse)
minus 100 / minus 100 percent [RCtrl + NUM 1]
Supercruise commands:
Cruise / Supercruise / Warp one - starts the supercruise process
Exit jump / Leave hyperscape / Quit Jump - brings the ship out of supercruise
Jump commands:
Jump / Warp / Warp 9 - starts the jump to another system
Change firegroup / Next firegroup [N] - selects the next firegroup
Deploy hardpoints / Deploy weapons / Prepare for combat / Red alert [U] - draw weapons
Holster / Retract hardpoints / Retract weapons [U] - retract weapons
Last firegroup / Previous firegroup [M] - selects the previous firegroup
* Sigma will warn you in case you tell it to enable weapons but they are already enabled; or you tell it to disable them, but they aren't enabled
Clear identity
Holster
Select EMP grenade
Select frag grenade
Select shield grenade
Shield on/off
Show apex
Show backpack
Show codex
Show engineer
Show fleet carrier
Show galnet
Show powerplay
Show squadron
Use energy cell
Use energy link
Use medkit
Use profile analyzer
Use suit tool / arc cutter / genetic sampler